Knuckler Chop Bob Bobber Rolling Chassis

Washington Chopper's own
Knuckler "Chop Bob" Rolling Chassis

You can also select with convetional Hydraulic Forks

Shown with Springer Forks
Old Frame Design is shown - now using new Frame Design K16060

Wider foot Print, more aggressive style, STYLISH LOOKS!

Washington Choppers Knuckle "Chop Bob" Roller Chassis $3,495
CLICK HERE to SELECT your Chop Bob Roller Options

FRAME
- K16057
- + 2" Leg stretch
- 1.5" Backbone stretch
- 34 degree Rake
- Tig Welded
WHEELS
- Chrome 60 SS Spoke - 2.15" x 21"w/ 3/4" axle-w/ bearings
- Chrome 60 SS Spoke - 5.5" x 18" w/ 3/4" axle - w/bearings
TIRES
- Avon - MH90 - 90mm
- Avon - 200/70/ - 200mm
FORKS
- Stock Chrome Hydraulic with 6 degree TT Rake or
- Stock Springer Forks - Chrome or Black

BRAKES
- Front and Rear Brake Rotors
HANDLEBARS and RISERS
- Select Chrome Drag or Ape Hanger bars w/ Chrome 3" Risers
SHEET METAL
- Gas Tank - Cole Foster Bobber Gas Tank
- 9" Round Fender and Custom WC's fender Bracket
- Round Oil Bag - Chrome or Raw - w/ mounting hardware
SEAT
- Solo Leather Seat - color Black
- 3" Chrome Springs and WC's Custom Seat Brackets
INCLUDES
- Chrome Wheel Spacer & Front and Rear Axle
- Front Fork Head Cups, Bear Races and Timkin Bearing

Select our CHROME BOLT KIT to assemble your Rolling Chassis (check out below what you will need)
Gas Tank 5/16 x 18 x 1 = $1.60 ea (quantity 2) - Allen Head 5/16 x 18 x 1 = $1.40 ea (quantity 2) - Hex Head	Rear Fender - Hex 3/8 x 16 x 1 = $1.35 ea (quantity 2)
Rear Fender - Buttonhead 3/8 x 16 x 1 = $1.60 ea (quantity 2) 3/8 x 16 1 1/2 = $2.65 ea (quantity 1)	Oil Tank - Hex 1/4 x 28 x 1 - $1.30 ea (quantity 2) 5/16 x 18 x 1 - $1.40 ea (quantity 2)
Rear Fender Washers Lock - 3/8 - $0.35 ea (quantity 7) Flat - 3/8 - $0.35ea (quantity 11)	Oil Tank Washers 1/4 - Lock - $0.20 / Flat - $0.20 ea (quantity 2) 5/16 - Lock - $0.35 / Flat - $0.35 ea (quantity 2)
Front Rotor Bolts - Buttonhead 5/16 x 18 x 1 1/4 = $1.90 ea (quntity 5) 5/16 Washers Flat = $0.25 (quantity 5) 5/16 Lock nut = $0.95 (quantity 5)	Rear Rotor Bolts - Buttonhead 3/8 x 16 x 1 1/4 = $1.90 ea (quntity 5) 3/8 Washers Flat = $0.35 (quantity 5) 3/8 Lock nut = $0.95 (quantity 5)
Seat - 5/16 Washers Lock - $0.25 / Flat - $0.25 ea (quantity 8) Cap Nuts - $2.20 (quantity 8) 5/16 x 18 x 1 1/2 - $2.05 ea (quantity 1)	Engine Mounting Bolt Kit - Every bolt and washer to mount the engine & Transmission $33.49 (quantity 1)

FABRICATION Services Available:
1. Assemble Front Forks, Install Fork Cups & Races into the frame - $50
2. Mount Front Wheel, mount front brake rotor and adjust wheel spacering - $75 - (will need to purchase Front Springer Caliper and Bracket)
3. Mount Rear Fender, mount rear sprocket, mount rear brake rotor & weld Fender Struts - $500 - (will need to purchase Rear Caliper and Bracket)
4. Weld Seat Brackets and adjust seat- $200
5. Weld Ground Post to frame - $25
6. Mount Gas Tank and weld brackets- $300

ROLLING CHASSIS assembly MOCKUP INSTRUCTIONS ROLLING CHASSIS Parts Build Sheet Give us a call if you have any questions - 360 671-1916.
© 2000/2009 Washington Choppers A Division of WebReign Graphics, Inc All Rights Reserved E-mail: sales@WashingtonChoppers.com		Washington Choppers 2120 Grant Street Unit 1, Bellingham, WA. 98225 360. 671-1916