Our MADE IN AMERICA Product list. Buy America if you can. Promote jobs and build up America.


Our La Rosa 13" and 16" Solo Seats as well as our Tool Bags and Saddlebags.

Made right in Oakland, CA

Click Here for the 13" Solo Seats - $199

Click Here for the 16" Solo Seats - $199

Click Here for our Hand Tooled Leather Seats - varies

Click Here for the Tool Bags - From $69

Click Here for the Saddlebags - From $140


STAINLESS STEEL SEAT PANS

 

We now have the 13" and 16" Seat Pans available to create your own seat.

13" Polished Stainless Steel with studs and front nose piece - $65

16" Polished Stainless Steel with studs and front nose piece - $70

 


All of our Frames

Made in AMercia

Click here Hard Tail Frames

Click Here Soft Tail Frames

Click Here Sportster Frames

Many starting at $925



FRISCO Style Chop Bob Custom Gas Tank

This NEW Classic FRISCO FLAT BOTTOM Sportster STYLE Chop Bob gas tank is a great addition to our line of custom Gas Tanks. This tank holds 2.9 gallons and gives you the high look so many of you have been asking for. The gas tank has two tabs for easy mounting. Comes with a screw-in pop-up Chrome gas cap.

#WC866C - Frisco Style Chop Bob - Price - $215

 


Paughco Gas Tanks

All Paughco Products are
Made in America

Click Here to view the entire line of Paughco Gas Tanks


I-Bar Custom Fender Strut Kit
from Washington Choppers


This Rear Fender Strut Kit is fabricated from 3/16" FLAT BAR mild steel, then waterjet styled to weld to the fender or bolt to your fender and frame. These struts will enhance the lines of your frame.

Overall Length is 10.75" with a 3/16" bolt hole at each end. You can bolt or weld the struts to the fender. Stylish, Strong and easy to mount.

#WCIBK - RAW - ready for paint or powder coat - $62 for the pair

NOT to be used with a passenger seat




Custom Fender Strut Kit from Washington Choppers
This Rear Fender Strut Kit is fabricated from 1/2" COLD ROLLED Round Stock steel, then waterjet styled ends to weld to the fender and bolt to your frame. These struts will enhance the lines of your frame.

NOT to be used with a passenger seat.
#WCFSK - RAW - ready for paint or powder coat - $54 for the kit


Washington Choppers Custom Welding Tabs
These welding tabs will save you time behind the bandsaw and grinder. These percission cut tabs are ready to weld to any part of your bike. We use them to weld fender struts, oil bag mounts and rear tail light brackets for the Lazer "Micro B" LED lights.

Works great on our frames or anyones frames.
They measure 1" wide X 1 1/4" high with 5/16" hole.
#WCWT - RAW - ready for paint or powder coat - $8 per pair


Custom Solo Seat Mounts from Washington Choppers

These weld-on Seat Mounts will save you time when mounting one of our solo seats. These percission milled seat mounts are ready to weld to your bike. We use them on all of our Chop Bob line of custom Bobbers.
1 1/4" x 1" with a 1 1/4" curve to mount to your frame. Works great on our frames or anyones frames.
#WCST - RAW - ready for paint or powder coat - $46 per pair


Have you had trouble finding Good Quality US Made Stainless Steel Wheel Spacers?
Well we have, so Washington Choppers decided to make our own. These 100% Stainless Steel Wheel Spacers are made from 1040 Stainless steel and work great as custom wheel spacers.

All spacers are .751 I.D. and 1.125 O.D.

#WC0.10
0.10"
$4.95 each
#WC0.336
0.336"
$4.95 each
#WC0.38
0.38"
$4.95 each
#WC0.446
0.446"
$5.95 each
#WC0.50
0.50"
$5.95 each
#WC0.625
0.625"
$5.95 each
#WC0.75
0.75"
$6.95 each
#WC0.86
0.86"
$6.95 each
#WC1.0
1.0"
$7.95 each
#WC1.10
1.10"
$7.95 each
#WC1.50
1.50"
$7.95 each
 


Allen Screws - 5/16" Allen Screws - 3/8" Allen Screws - 1/2" Button Heads - #10 & 1/4 Button Heads 5/16"
5/16 x 24 x 3/4
# PSHC-219 - $1.60
3/8 x 24 x 3/4
#PSHC-231 - $1.65
1/2 x 20 x 13/4
#PSHC-2026 - $2.85
10 x 32 x 3/8
# BHC-880 - $1.10
5/16 x 24 x 1/2
# BHC-812 - $1.35
5/16 x 24 x 1
# PSHC-221 - $1.60
3/8 x 24 x 1
#PSHC-232 - $1.85
1/2 x 20 x 2
#PSHC-2011 - $3.10
10 x 32 x 1/2
# BHC-803 - $1.10
5/16 x 24 x 3/4
# BHC-813 - $1.35
5/16 x 24 x 11/4
# PSHC-222 - $1.65
3/8 x 24 x 1 1/4
#PSHC-233 - $1.85
1/2 x 20 x 2 1/4
#PSHC-2012 - $3.15
10 x 32 x 5/8
# BHC-805 - $1.15
5/16 x 24 x 1
# BHC-814 - $1.40
5/16 x 24 x 1 1/2
# PSHC-223 - $1.65
3/8 x 24 x 1 1/2
#PSHC-234 - $1.90
1/2 x 13x 1 3/4
#PSHC-2018- $2.85
10 x 24 x 3/8
# BHC-859 - $1.10
5/16 x 24 x 1 1/4
# BHC-815 - $1.85
5/16 x 18 x 1/2
#PSHC-270 - $1.60
3/8 x 16 x 1/2
#PSHC-2001 - $1.75
1/2 x 13x 2
#PSHC-2019- $3.10
10 x 24 x 1/2
# BHC-825 - $1.10
5/16 x 24 x 1 1/2
# BHC-816 - $1.90
5/16 x 18 x 3/4
#PSHC-272 - $1.60
3/8 x 16 x 3/4
#PSHC-285 - $1.75
1/2 x 13x 2 1/2
#PSHC-2020- $3.15
10 x 24 x 5/8
# BHC-826 - $1.15
5/16 x 18 x 1/2
# BHC-840 - $1.35
5/16 x 18 x 1
#PSHC-274 - $1.60
3/8 x 16 x 1
#PSHC-286 - $1.85
  1/4 x 28 x 1/2
#BHC-808 - $1.15
5/16 x 18 x 3/4
# BHC-841 - $1.35
5/16 x 18 x 1 1/4
#PSHC-275 - $1.70
3/8 x 16 x 1 1/4
#PSHC-288 - $1.90
  1/4 x 28 x 3/4
#BHC-809 - $1.25
5/16 x 18 x 1
# BHC-843 - $1.35
5/16 x 18 x 1 1/2
#PSHC-276 - $1.75
3/8 x 16 x 1 1/2
#PSHC-289 - $1.95
  1/4 x 28 x 1
#BHC-810 - $1.30
5/16 x 18 x 1 1/4
# BHC-844 - $1.90
5/16 x 18 x 1 3/4
#PSHC-277 - $1.80
3/8 x 16 x 1 3/4
#PSHC-290 - $2.10
  1/4 x 20 x 1/2
#BHC-828 - $1.10
5/16 x 18 x 1 1/2
# BHC-845 - $2.05
5/16 x 18 x 2
#PSHC-278 - $1.85
3/8 x 16 x 2
#PSHC-291 - $2.10
  1/4 x 20 x 3/4
#BHC-830 - $1.25
5/16 x 18 x 21/4
#PSHC-280 - $2.00
3/8 x 16 x 2 1/4
#PSHC-292 - $2.25
  1/4 x 20 x 1
#BHC-832 - $1.30
 
Button Heads 3/8" Hex Bolts - 1/4" Hex Bolts - 5/16" Hex Bolts - 3/8" Hex Bolts - 7/16"
3/8 x 24 x 1/2
# BHC-818 - $1.50
1/4 x 28 x 3/4
#HHC-651 - $1.25
5/16 x 24 x 3/4
# HHC-660 - $1.30
3/8 x 24 x 3/4
# HHC-668 - $1.30
7/16 x 20 x 1
# HHC-674 - $1.65
3/8 x 24 x 3/4
# BHC-819 - $1.55
1/4 x 28 x 1
#HHC-653 - $1.30
5/16 x 24 x 1
# HHC-662 - $1.40
3/8 x 24 x 1
# HHC-669 - $1.30
7/16 x 20 x 1 1/4
# HHC-675 - $1.65
3/8 x 24 x 1
# BHC-820 - $1.60
1/4 x 28 x 1 1/4
#HHC-654 - $1.35
5/16 x 24 x 1 1/4
#HHC-663 - $1.40
3/8 x 24 x 1 1/4
#HHC-670 - $1.40
7/16 x 20 x 1 1/2
#HHC-676 - $1.70
3/8 x 24 x 1 1/4
# BHC-821 - $2.50
1/4 x 28 x 1 1/2
#HHC-655 - $1.35
5/16 x 24 x 1 1/2
#HHC-664 - $1.45
3/8 x 24 x 1 1/2
#HHC-671 - $1.50
7/16 x 20 x 1 3/4
#HHC-677 - $1.70
3/8 x 24 x 1 1/2
# BHC-822 - $2.60
1/4 x 20 x 1/2
#HHC-633 - $1.20
5/16 x 18 x 3/4
#HHC-610 - $1.30
3/8 x 18 x 3/4
#HHC-618 - $1.30
7/16x 14 x 1
#HHC-624 - $1.65
3/8 x 16 x 1/2
# BHC-848 - $1.50
1/4 x 20 x 3/4
#HHC-601 - $1.25
5/16 x 18 x 1
#HHC-612 - $1.40
3/8 x 18 x 1
#HHC-619 - $1.35
7/16 x 14 x 1 1/4
#HHC-625 - $1.65
3/8 x 16 x 3/4
# BHC-849 - $1.50
1/4 x 20 x 1
#HHC-603 - $1.25
5/16 x 18 x 1 1/4
#HHC-613 - $1.40
3/8 x 18 x 1 1/4
#HHC-620 - $1.40
7/16 x 14 x 1 1/2
#HHC-626 - $1.70
3/8 x 16 x 1
# BHC-850 - $1.60
1/4 x 20 x 1 1/4
#HHC-604 - $1.35
5/16 x 18 x 1 1/2
#HHC-614 - $1.50
3/8 x 18 x 1 1/2
#HHC-621 - $1.50
7/16 x 14 x 1 3/4
#HHC-627 - $1.70
38 x 16 x 1 1/4
# BHC-851 - $1.65
1/4 x 20 x 1 1/2
#HHC-605 - $1.35
     
3/8 x 16 x 1 1/2
# BHC-852 - $2.65
       

Performance Machine Brakes

Click Here for the entire brake product line.



Performance Machine Air Cleaners - Click Here to view the entire line of PM Air Cleaners

Performance Machine Sprockets - Click Here to view the entire line of PM Sprockets



Billet Wheels - Made in America - Click Here to View our wheel selection


 

52 Spoke MAMMOTH FAT Wheels
MADE IN THE USA - DOT CERTIFIED

Mammoth Wheels -
Click Here to View our wheel selection


CUSTOM SPOKE Wheels
MADE IN THE USA - DOT CERTIFIED
AVAILABLE FINISHES: - SHOW CHROME & HIGH POLISH
TRIPLE CHROME PLATED BILLET HUB

Spoke Wheels - Made in America - Click Here to View our wheel selection

 

Paughco Springer Forks

Made in America

Click Here for the entire line of Paughco Springers

 

Custom Jockey Shifter System - (Suicide Shifter)

Labriola Machine Jockey Shifter, also known as a Suicide Shifter is a hand-shifter for motorcycles. These were originally found on the early designed bikes from the turn of the century to the 40's and 50's. Now with the resurgence of the Bobber style of motorcycle. These systems have made there way back into the mainstream.

Customize your ride with one of these neat systems. Easy to install, a blast to ride. Give us a call and tell us the style of bike and we will get your bike into the great fraternity of Retro riders.

Click Here to view the Product Line


Give us a call if you have any questions - 360 671-1916.

Give us a call if you have any questions - 360 671-1916.

© 2000/2011 Washington Choppers
A Division of WebReign Graphics, Inc
All Rights Reserved
E-mail: sales@WashingtonChoppers.com

Washington Choppers

Washington Choppers
2120 Grant Street Unit 1,
Bellingham, WA. 98225

360. 671-1916